warning: Invalid ppd_dir value: None note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c). note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r). warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly. error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP. error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP. error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP. error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP. error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP. error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly. error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP. HP Linux Imaging and Printing System (ver. 2.8.2) Dependency/Version Check Utility ver. 13.0 Copyright (c) 2001-7 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Saving output in log file: hp-check.log Initializing. Please wait... --------------- | SYSTEM INFO | --------------- Basic system information: FreeBSD omsk.mushinsky.net 7.0-STABLE FreeBSD 7.0-STABLE #5: Mon Mar 17 22:20:23 EDT 2008 root@tomsk.mushinsky.net:/usr/obj/usr/src/sys/K20080316 amd64 Distribution: unknown 0.0 HPOJ running? No, HPOJ is not running (OK). Checking Python version... OK, version 2.5.2 installed Checking PyQt version... OK, version 3.17 installed. Checking SIP version... OK, Version 4.7.4 installed Checking for CUPS... Status: scheduler is running Version: 1.3.6 ------------------------------------ | COMPILE AND RUNTIME DEPENDENCIES | ------------------------------------ Checking for dependency: cups - Common Unix Printing System... OK, found. Checking for dependency: cups-ddk - CUPS driver development kit... Checking for dependency: cups-devel- Common Unix Printing System development files... Checking for dependency: gcc - GNU Project C and C++ Compiler... OK, found. Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer... OK, found. Checking for dependency: libcrypto - OpenSSL cryptographic library... Checking for dependency: libjpeg - JPEG library... Checking for dependency: libnetsnmp-devel - SNMP networking library development files... Checking for dependency: libpthread - POSIX threads library... Checking for dependency: libtool - Library building support services... OK, found. Checking for dependency: libusb - USB library... Checking for dependency: make - GNU make utility to maintain groups of programs... Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)... Checking for dependency: ppdev - Parallel port support kernel module.... Checking for dependency: PyQt - Qt interface for Python... OK, found. Checking for dependency: python-devel - Python development files... Checking for dependency: Python 2.3 or greater - Required for fax functionality... OK, found. Checking for dependency: Python 2.2 or greater - Python programming language... OK, found. Checking for dependency: Reportlab - PDF library for Python... OK, found. Checking for dependency: SANE - Scanning library... Checking for dependency: SANE - Scanning library development files... Checking for dependency: scanimage - Shell scanning program... OK, found. Checking for dependency: xsane - Graphical scanner frontend for SANE... OK, found. ---------------------- | HPLIP INSTALLATION | ---------------------- Currently installed HPLIP version... HPLIP 2.8.2 currently installed in '/usr/local/share/hplip'. Current contents of '/usr/local/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hpssd] # Note: hpssd does not support dynamic ports # Port 2207 is the Iusb_set_debug: Setting debugging level to 4 (on) usb_os_find_busses: Found /dev/usb0 usb_os_find_busses: Found /dev/usb1 usb_os_find_busses: Found /dev/usb2 usb_os_find_busses: Found /dev/usb3 usb_os_find_busses: Found /dev/usb4 usb_os_find_busses: Found /dev/usb5 usb_os_find_busses: Found /dev/usb6 usb_os_find_busses: Found /dev/usb7 usb_os_find_devices: Found /dev/ugen0 on /dev/usb3 usb_control_msg: 128 6 512 0 0x7fffffff5d80 8 1000 usb_control_msg: 128 6 512 0 0x800d80a00 124 1000 usb_control_msg: 128 6 770 1033 0x7fffffff5cf0 255 5000 usb_control_msg: 128 6 771 1033 0x7fffffff5cf0 255 5000 USB error: error sending control message: Input/output error usb_set_debug: Setting debugging level to 4 (on) usb_os_find_busses: Found /dev/usb0 usb_os_find_busses: Found /dev/usb1 usb_os_find_busses: Found /dev/usb2 usb_os_find_busses: Found /dev/usb3 usb_os_find_busses: Found /dev/usb4 usb_os_find_busses: Found /dev/usb5 usb_os_find_busses: Found /dev/usb6 usb_os_find_busses: Found /dev/usb7 usb_os_find_devices: Found /dev/ugen0 on /dev/usb3 usb_control_msg: 128 6 770 1033 0x7fffffffde50 255 5000 usb_control_msg: 128 6 771 1033 0x7fffffffde50 255 5000 USB error: error sending control message: Input/output error error: Unable to communicate with device (code=12): hp:/usb/Photosmart_C4200_series?serial=0 error: Device not found ANA assigned port for hpssd port=2207 [hplip] version=2.8.2 [dirs] home=/usr/local/share/hplip run=/var/run ppd=/usr/local/share/ppd/HP ppdbase=/usr/local/share/ppd doc=/usr/local/share/doc/hplip-2.8.2 icon=/usr/local/share/applications cupsbackend=/usr/local/libexec/cups/backend cupsfilter=/usr/local/libexec/cups/filter drv=/usr/local/libexec/cups/driver # Following values are determined at configure time and cannot be changed. [configure] network-build=yes pp-build=no gui-build=yes scanner-build=yes fax-build=yes cups11-build=no doc-build=yes shadow-build=no foomatic-drv-install=yes foomatic-ppd-install=yes foomatic-rip-hplip-install=yes internal-tag=2.8.2.10 -------------------------- | DISCOVERED USB DEVICES | -------------------------- Device URI Model ---------------------------------------- ---------------------------------- hp:/usb/Photosmart_C4200_series?serial=0 HP Photosmart C4200 series --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- Photosmart_C4200 ---------------- Type: Printer Installed in HPLIP?: Yes, using the hp: CUPS backend. Device URI: hp:/usb/Photosmart_C4200_series?serial=0 ---------------------- | SANE CONFIGURATION | ---------------------- 'hpaio' in '/usr/local/etc/sane.d/dll.conf'... OK, found. SANE backend 'hpaio' is properly set up. Checking output of 'scanimage -L'... usb_set_debug: Setting debugging level to 4 (on) usb_os_find_busses: Found /dev/usb0 usb_os_find_busses: Found /dev/usb1 usb_os_find_busses: Found /dev/usb2 usb_os_find_busses: Found /dev/usb3 usb_os_find_busses: Found /dev/usb4 usb_os_find_busses: Found /dev/usb5 usb_os_find_busses: Found /dev/usb6 usb_os_find_busses: Found /dev/usb7 usb_os_find_devices: Found /dev/ugen0 on /dev/usb3 usb_control_msg: 128 6 512 0 0x7fffffff9ed0 8 1000 usb_control_msg: 128 6 512 0 0x80131d080 124 1000 usb_control_msg: 128 6 770 1033 0x7fffffff9e40 255 5000 usb_control_msg: 128 6 771 1033 0x7fffffff9e40 255 5000 USB error: error sending control message: Input/output error usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) usb_set_debug: Setting debugging level to 4 (on) device `hpaio:/usb/Photosmart_C4200_series?serial=0' is a Hewlett-Packard Photosmart_C4200_series all-in-one --------------------- | PYTHON EXTENSIONS | --------------------- Checking 'cupsext' CUPS extension... OK, found. Checking 'pcardext' Photocard extension... OK, found. Checking 'hpmudext' I/O extension... OK, found. Checking 'scanext' SANE scanning extension... OK, found. ---------------error: 14 errors and/or warnings. -- | USB I/O SETUP | ----------------- ----------- | SUMMARY | ----------- Please refer to the installation instructions at: http://hplip.sourceforge.net/install/index.html